PRODUCTS

We want every Encore experience, from start to finish, to be a good one, which is why we focus heavily on ways to make our products and services exceed your expectations.

 

SOFT-DRAWN BARE CONDUCTORS

Copper conductors are used in overhead electrical transmission and distribution systems for grounding electrical systems, and where high-conductivity and flexibility are required for equipment and circuit grounding.

SEE FULL PRODUCT SPECIFICATIONS
 

BARREL PACKS SOFT-DRAWN BARE CONDUCTORS

Copper conductors are used in overhead electrical transmission and distribution systems for grounding electrical systems, and where high-conductivity and flexibility are required for equipment and circuit grounding.

SEE FULL PRODUCT SPECIFICATIONS
 

BARREL PACKS THHN / MTW / THWN-2 / T90 COPPER CONDUCTOR

Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC). Type THHN/THWN-2 is permitted for new construction or rewiring for 600-volt applications.

SEE FULL PRODUCT SPECIFICATIONS
 

THHN/MTW/THWN-2/T90 COPPER CONDUCTOR SUPERSLICK ELITE®

Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC). Type THHN/THWN-2 is permitted for new construction or rewiring for 600-volt applications.

SEE FULL PRODUCT SPECIFICATIONS
 

BARREL PACKS XHHW-2 / RW90 COPPER CONDUCTOR

Type XHHW-2/RW90 building wire is intended for general purpose applications utilized in conduit, underground in conduit, or other recognized raceways for services, feeders, and branch-circuit wiring as specified in the National Electrical Code (NEC).

SEE FULL PRODUCT SPECIFICATIONS
 

XHHW-2 / RW90 COPPER CONDUCTOR SUPERSLICK ELITE®

Type XHHW-2/RW90 building wire is intended for general purpose applications utilized in conduit, underground in conduit, or other recognized raceways for services, feeders, and branch-circuit wiring as specified in the National Electrical Code (NEC).

SEE FULL PRODUCT SPECIFICATIONS
 

USE-2/RHH/RHW-2 COPPER CONDUCTOR

Type USE-2 or RHH or RHW-2 copper conductors are suitable for use in conduit and raceways installed underground in conduit, wet locations, and where condensation and moisture accumulations within the conduit do not exceed 90˚C.

SEE FULL PRODUCT SPECIFICATIONS
 

PHOTOVOLTAIC COPPER CONDUCTOR 600V AND 1000V/2000V

Type Photovoltaic copper conductors are suitable for outdoor rooftop applications without conduit and for use in conduits and raceways installed underground in conduit in wet locations, and where condensation and moisture accumulations within the conduit do not exceed 90ºC.

SEE FULL PRODUCT SPECIFICATIONS
 

TRACER WIRE COPPER CONDUCTOR / 30 VOLT & 600 VOLT

Listed for 30V or 600V. Primarily used in the detection of underground piping and other underground utility installations.

SEE FULL PRODUCT SPECIFICATIONS
 

THW-2 COPPER CONDUCTOR

Type THW-2 conductor is intended for general purpose applications utilized in conduit or other raceways for services, feeders, and branch-circuit wiring as specified in the National Electric Code (NEC). May be used in wet or dry locations at temperatures not to exceed 90˚C. Type THW-2 is permitted for 600 volt applications.

SEE FULL PRODUCT SPECIFICATIONS
 

MTW / AWM / TEW MACHINE TOOL & APPLIANCE WIRE

Type MTW or TEW conductors are primarily used in control cabinets, in machine tool applications, and in appliance wiring applications at temperatures -25°C to 105°C. For use in accordance with the National Electrical Code (NEC) and NFPA Standard 79. Voltage rating for all applications is 600 volts.

SEE FULL PRODUCT SPECIFICATIONS
 

TFFN / TFn / TEWN COPPER CONDUCTOR

Type TFFN (stranded) or TFN (solid) conductors are primarily used as fixture wire as defined by the National Electrical Code (NEC) at temperatures not to exceed 90°C in dry locations. For applications requiring Type MTW, the conductor is permitted for use in dry locations at 90°C or not to exceed 60°C in wet locations or where exposed to oils or coolants.

SEE FULL PRODUCT SPECIFICATIONS
 

TW-#8 SOLID GREEN

Type TW is suitable for use in conduit or other recognized raceways for services, feeders, and branch-circuit wiring. Suitable for use in wet or dry locations where temperatures do not exceed 75°C.

SEE FULL PRODUCT SPECIFICATIONS
 

METAL-CLAD & ARMOR-CLAD CABLE/SMARTCOLOR ID ®

 

SMARTCOLOR ID® MC-COPPER CONDUCTOR-ALUMINUM ARMOR

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

SMARTCOLOR ID® MC-COPPER CONDUCTOR-STEEL ARMOR/THHN INNERS

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

SMARTCOLOR ID® MC-COPPER CONDUCTOR STEEL ARMOR/XHHW-2 INNERS

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

MC-SG (SMARTGROUNDTM) COPPER CONDUCTOR ALUMINUM ARMOR

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

MC-SG (SMARTGROUNDTM) COPPER CONDUCTOR STEEL ARMOR

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

MC HCF – SG (SMARTGROUNDTM) COPPER CONDUCTOR

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

MC-FPLP PLENUM RATED LIMITED POWER TYPE FIRE ALARM AND CONTROL CABLE

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

SMARTCOLOR ID® MC-COPPER CONDUCTOR ISOLATED GROUND ALUMINUM ARMOR THHN/THWN-2 INNERS

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

SMARTCOLOR ID® MC-COPPER CONDUCTOR OVERSIZED NEUTRAL AlUMINUM ARMOR THHN/THWN-2 INNERS

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

SMARTCOLOR ID® MC-COPPER CONDUCTOR MULTIPLE NEUTRAL ALUMINUM ARMOR THHN/THWN-2 INNERS

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

SMARTCOLOR ID® MC-COPPER CONDUCTOR-MULTIPLE NEUTRAL-STEEL ARMOR THHN/THWN-2 INNERS

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

SMARTCOLOR ID® MC-COPPER CONDUCTOR-MULTI-CIRCUIT-ALUMINUM ARMOR THHN/THWN-2 INNERS

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

MC-COPPER CONDUCTOR – ALUMINUM ARMOR PVC JACKET XHHW-2 INNERS

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

MC-COPPER CONDUCTOR – ALUMINUM ARMOR PVC JACKET THHN-2 INNERS

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

MC-COPPER CONDUCTOR-Steel ARMOR PVC JACKET XHHW-2 INNERS

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

SMARTCOLOR ID® AC-COPPER CONDUCTOR-Aluminum Armor/THHN INNERS

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

SMARTCOLOR ID® AC-COPPER CONDUCTOR-STEEL ARMOR/THHN INNERS

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS
 

SMARTCOLOR ID® AC-HCF COPPER CONDUCTOR ALUMINUM ARMOR

  • Suitable for applications requiring branch and feeder circuits for non-essential, general purposes electrical systems in patient care areas of health care facilities or for use in essential electrical systems when in accordance with 2008 NEC 517.30 (C)(3). Acceptable in facilities such as hospitals, nursing homes, dental offices, and other types of medical facilities including out patient facilities
SEE FULL PRODUCT SPECIFICATIONS